Yamaha SW10 STUDIO Service Manual

Also see for SW10 STUDIO: Owner's manual Owner's manual Owner's manual Owner's manual

Contents

SW10 STUDIO2WARNINGWARNING: CHEMICAL CONTENT NOTICE!The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable)components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to causecancer and/or birth defects or other reproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.IMPORTANT NOTICEThis manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basicservice procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users,and have therefore not been restated.WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,destruction of expensive components and failure of the product to perform as specified. For these reasons, we adviseall Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or theappointed service representative.IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certification,recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and servicedepartments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes inspecification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact thedistributor’s Service Division.WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulatedby grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.Components having special characteristics are marked and must be replaced with parts having specification equal to thoseoriginally installed.IMPORTANT NOTICE FOR THE UNITED KINGDOMConnecting the Plug and CordWARNING: THIS APPARATUS MUST BE EARTHEDIMPORTANT. The wires in this mains lead are coloured inaccordance with the following code:GREEN-AND-YELLOW : EARTHBLUE : NEUTRALBROWN : LIVEAs the colours of the wires in the mains lead of this apparatus maynot correspond with the coloured markings identifying theterminals in your plug proceed as follows:The wire which is coloured GREEN-and-YELLOW must beconnected to the terminal in the plug which is marked by the letterE or by the safety earth symbol or colored GREEN or GREEN-and-YELLOW.The wire which is coloured BLUE must be connected to theterminal which is marked with the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to theterminal which is marked with the letter L or coloured RED.印の部品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使用ください。