Yamaha Soavo-1 Owner's Manual

Also see for Soavo-1 Piano Black: Service manual Owner's manual

Contents

4EnSPEAKERSABLR++ – –SPEAKERSLR++ – –When using a banana plugTo connect the speaker to theoutput terminals of the amplifier, twopairs of cables for each of thewoofer and the tweeter/mid-rangeare used instead of standardconnections. This type ofconnection decreases themodulation distortion caused byelectric resistance of the cables anddriving current of the speakers.Consequently, purer sound qualitycan be expected.To utilize bi-wired connections,remove the jumper cables from theterminals first, and then connect thewoofer and the tweeter/mid-rangeto the amplifier separately using twopairs of cables.< Bi-wired connections>Remove the jumpercables beforeconnecting.AmplifierWoofer terminalsTweeter/Mid-rangeterminalsAmplifierSoavo-1 (L)Soavo-1 (R) Soavo-1 (L)Soavo-1 (R)Both SPEAKERS A and Bshould be selected.1 Unscrew the terminal knob.2 Remove the cover by pulling it toward you.Black (–) Red (+)JumpercableBanana plugWhen your amplifier has only oneset of speaker output terminals.When your amplifier has two setsof speaker output terminals.213 Tighten the terminal knob.4 Simply insert the banana plug into the terminal.34