Yamaha TRX-1 Owner's Manual

Contents

4CONNECTIONS■ Attaching the cable plugs (A) tothe speaker cables1 Pull both sides of the cover of the cable plug (A)firmly away from the top of the plug, then partiallyremove the top part of the cover.2 Peel away about 15 mm of covering from the tip ofa commercially available speaker cable and twistthe cable core firmly in a clockwise direction.Twisting loosely may cause a short circuit.3 Match the speaker cable polarity (+/–) with thepolarity mark (+/–) of the cable plug, then inserteach cable core into the cable plug (A). Be surethat it is firmly in contact with the metal part of thespeaker cable.4 Replace the cover.Attach the other cable plug (A) in the same way.■ Connecting the wireless receiverunit1 Remove the cover from the wireless receiver unitas shown below, to access the connectionterminal. Connect your rear speaker terminalswith the corresponding color terminals on thewireless receiver unit. Reattach the cover.2 Insert the stand into the brackets as shown below.3 Connect the AC power cable of the wirelessreceiver unit to an AC outlet.Connecting the wireless receiverunitGood No Good15 mm ←ToAC outletSurround RspeakerSurround Lspeaker(Blue)(Gray)

/ 7

Related manuals for Yamaha TRX-1