PERIODIC MAINTENANCE AND ADJUSTMENT7-36234567893. Insert a new bulb into the socket,push it in, and then turn it clock-wise until it stops.4. Install the lens by installing thescrews. NOTICE: Do not over-tighten the screws, otherwisethe lens may break.[ECA10681]EAU24204Replacing a turn signal lightbulb1. Remove the turn signal light lensby removing the screw.2. Remove the burnt-out bulb bypushing it in and turning it counter-clockwise.3. Insert a new bulb into the socket,push it in, and then turn it clock-wise until it stops.4. Install the lens by installing thescrew. NOTICE: Do not over-tighten the screw, otherwise thelens may break.[ECA11191]1. Tail/brake light bulb11. Screw2. Turn signal light lens1 21. Turn signal light bulb1
