Yamaha VS6 Quick Start Manual

Also see for VS4: Owner's manual Specifications

Contents

please read carefully before proceeding

PLEASE READ CAREFULLY BEFORE PROCEEDING* Please keep this manual in a safe place for future reference.WARNINGAlways follow the basic precautions listed below to avoid the possibility ofserious injury or even death from electrical shock, short-circuiting, damages,fire or other hazards. These precautions include, but are not limited to, thefollowing:• This device contains no user-serviceable parts. Do not open the device or attemptto disassemble the internal parts or modify them in any way. If it should appear to bemalfunctioning, discontinue use immediately and have it inspected by qualifiedYamaha service personnel.• Do not put burning items, such as candles, on the unit. A burning item may fall overand cause a fire.CAUTIONAlways follow the basic precautions listed below to avoid the possibility ofphysical injury to you or others, or damage to the device or other property.These precautions include, but are not limited to, the following:• Do not place the device in an unstable position where it might accidentally fall over.• Do not place the device in a location where it may come into contact with corrosivegases or salt air. Doing so may result in malfunction.• Before moving the device, remove all connected cables.• Always consult qualified Yamaha service personnel if the device installation requiresconstruction work, and make sure to observe the following precautions.- Choose mounting hardware and an installation location that can support theweight of the device.- Avoid locations that are exposed to constant vibration.- Use the required tools to install the device.- Inspect the device periodically.• Before connecting the device to other devices, turn off the power for all devices.Before turning the power on or off for all devices, set all volume levels to minimum.• Use only speaker cables for connecting speakers to the speaker jacks. Use of othertypes of cables may result in fire.• Do not insert your fingers or hands in any gaps or openings on the device.• Do not operate the device if the sound is distorting. Prolonged use in this conditioncould cause overheating and result in fire.• Select a suitable power amplifier for use with this device (see SPECIFICATIONS).Even if the output power of the amplifier is lower than the power rating (PGM) of thisdevice, use of excessive input signals resulting clipping may cause damage to thedevice.Malfunction or fire may occur especially when the following sounds or noises aregenerated:- feedback, when using a microphone- continuous and extreme volume sound from a musical instrument- extreme continuous distorted sound- noise caused by plugging/unplugging the cable while the amplifier is turned onUNPACKINGUnpack the contents and confirm that all the following items are includedSpeaker × 2, Bracket × 2, Retaining knob × 4, Terminal cover × 2,Terminal cover screw × 4.Owner’s Manual (this manual), SPECIFICATIONS* Speaker cable not included.EnglishYamaha cannot be held responsible for damage caused by improper use ormodifications to the device.1 MOUNTING THE SPEAKERSPRECAUTIONSDo not openFire warningLocationConnectionsHandling cautionPRIÈRE DEPROCÉD* Rangez soigneusAVERTISVeillez à toujours observéviter de graves blessurecircuit, de dégâts, d’un in’est pas exhaustive :• Cet appareil ne contient al’appareil et ne tentez pasfaçon que ce soit. Si l’appimmédiatement hors tensi• Ne placez pas sur l’apparepourraient se renverser etATTENTObservez toujours les prrisque de blessure corpodétérioration de l’instrumtoutefois pas exhaustive• Ne placez pas l’appareil daccidentellement.• Ne disposez pas l’apparegaz corrosifs ou de l’air àdysfonctionnements.• Avant de déplacer l’appar• Veillez toujours à consulteenceintes nécessite des tles précautions ci-après.- Choisissez un matériel dpour supporter le poids- Évitez les emplacement- Utilisez les outils approp- Inspectez l’appareil péri• Avant de raccorder l’appatension. Avant de mettre usonore sur le niveau minim• Utilisez uniquement des ccorrespondantes. L’utilisat• Ne glissez pas les doigts• N’utilisez pas l’appareil enpeut provoquer une surch• Lors de la sélection d’un asortie de l’amplificateur esSPECIFICATIONS).Si la puissance de sortie dl’appareil (programme), ceun signal d’entrée excessUn dysfonctionnement ougénération des sons ou d- Effet Larsen généré lors- Volume sonore extrême- Son déformé émis en c- Bruit provoqué par le bractivé.DEBALLAGEAprès le déballage, assurezFrançaisYamaha ne peut être tenu rimpropre de l’unité ou par dPRÉCNe pas ouvrirPrévention contre lEmplacementConnexionsPrécautions de ma

/ 2

Related manuals for Yamaha VS4