PERIODIC MAINTENANCE3-2EAS2GB2079GENERAL MAINTENANCE AND LUBRICATION CHARTNO. ITEM CHECKS AND MAINTENANCE JOBSINITIAL ODOMETER READ-INGS600 mi(1000km) or 1month1800 mi(3000km) or 3months3000 mi(5000km) or 6months1 Clutch • Check operation.• Adjust or replace cable. 2 * Cooling sys-tem• Check hoses for cracks of damage.• Replace if necessary. • Replace with ethylene glycol anti-freeze coolant every 1 year. Every 1 year3 * Spark arrest-er • Clean. 4 * Front brake• Check operation, fluid level, and for flu-id leakage.• Replace brake pads if necessary. • Replace brake fluid every 1 year. Every 1 year5 * Rear brake• Check operation, fluid level, and for flu-id leakage.• Replace brake pads if necessary. • Replace brake fluid every 1 year. Every 1 year6 * Brake hoses • Check for cracks or damage. • Replace. Every 4 years7 * Wheels• Check runout, spoke tightness and fordamage.• Tighten spokes if necessary. 8 * Tires• Check tread depth and for damage.• Replace if necessary.• Check air pressure.• Correct if necessary. 9 * Wheel bear-ings• Check bearings for smooth operation.• Replace if necessary. 10 *Swingarmpivot bear-ings• Check bearing assemblies for loose-ness.• Moderately repack with lithium-soap-based grease. 11 Drive chain• Check chain slack/alignment and con-dition.• Adjust and lubricate chain with a spe-cial O-ring chain lubricant thoroughly.Every ride12 * Steeringbearings• Check bearing assemblies for loose-ness.• Moderately repack with lithium-soap-based grease every 1200 mi (2000 km)or 12 months (whichever comes first).