PERIODIC MAINTENANCE AND MINOR REPAIR6-296XVS1100AIf a fuse is blown, replace it as follows.NOTE:Include steps 1–3 and 8–9 only for themain fuse.1. Remove the rider seat. (See page3-12.)2. Remove the quick fastenersshown by pushing the center inwith a screwdriver, then pulling thefastener out.3. Pull the ignitor unit panel outwardto the right.4. Turn the key to “OFF” and turn offthe electrical circuit in question.5. Remove the blown fuse, and theninstall a new fuse of the specifiedamperage.CAUTION:ECA10640Do not use a fuse of a higher amper-age rating than recommended toavoid causing extensive damage tothe electrical system and possibly afire.1. Fuse box2. Headlight fuse3. Signaling system fuse4. Ignition fuse5. Carburetor heater fuse6. Parking lighting fuse7. Backup fuse (for odometer and immobilizersystem)8. Spare fuse1. Quick fastener1. Ignitor unit panel2. Spare main fuse3. Main fuseSpecified fuses:Main fuse:30.0 ABackup fuse:XVS1100 5.0 AXVS1100A 10.0 AIgnition fuse:10.0 AHeadlight fuse:15.0 ACarburetor heater fuse:15.0 ASignaling system fuse:10.0 AParking lighting fuse:XVS1100A 10.0 A
