4-21234567891011EBU18061Handlebar switchesEBU18070Engine stop switch “ENG. STOP”Set this switch to “RUN” before starting the engine.The engine stop switch controls the ignition andstops the engine when it is running. Use this switchto stop the engine in an emergency situation. Theengine will not start or run when this switch is setto “OFF”.EBU18090Start switch “START”Push this switch to crank the engine with the start-er.CAUTION:ECB00050See the starting instructions on page 6-1 priorto starting the engine.EBU18120Light switch “LIGHTS”Set this switch to “LO” to turn on the low beamsand the taillight. Set the switch to “HI” to turn on thehigh beams and the taillight. Set the switch to“OFF” to turn off all the lights.NOTE:The headlights and the taillight can be turned ononly when the engine is running.EBU18280Throttle leverOnce the engine is running, movement of the throt-tle lever will increase the engine speed.Regulate the speed of the ATV by varying thethrottle position. Because the throttle is spring-loaded, the ATV will decelerate, and the engine will1. Light switch “LIGHTS”2. Engine stop switch “ENG. STOP”3. Start switch “START”123
