Yamaha YHT-S300 Quick Reference Manual

Also see for YHT-S300: Owner's manual Owner's manual Quick reference guide Service manual

Contents

6 EnPLAYBACKOnce you have finished all cable connections and remote control operation, follow the procedure below to start basicplayback operation.1 Press .This system is turned on and the STATUS indicatorlights green.yThis system has the auto-sleep function, which willautomatically switch the system to turn off if the system isleft turned on for 24 hours without any operation beingperformed.2 Press one of the input buttons to select aninput source.3 Start playback on the selected externalcomponent.For information on the external component, refer tothe instruction manual for the product.4 Press VOLUME +/– to adjust the volumelevel.yTo turn off the volume temporarily, press MUTE. While themute function is activated, the VOLUME indicator flashes.To resume the volume, press MUTE again or pressVOLUME +/–.When sound of HDMI is output from the TV, the volumelevel does not change if you press VOLUME +/–.■ Using the remote controlBasic playback operation124 NotePress again to set the system to standbymode.When the “HDMI CONTROL” is set to “ON”, theSTATUS indicator lights red. When the “HDMICONTROL” is set to “OFF”, the STATUS indicatorturns off.Within 6 mUse the remote control within 6 m of thesubwoofer integrated receiver and point it towardthe remote control sensor.• Be careful not to spill liquid on the remote control.• Be careful not to drop the remote control.• Do not leave the remote control in a place that is:– hot or humid, such as near a heater or in a bathroom– extremely cold– dustyNotes