Yamaha YST-SW105 Owner's Manual

Also see for YST-SW105: Owner's manual Owner's manual Service manual

Contents

EnglishE-7OUTPUT+ – +–+ – +–INPUT2 AUTOSTANDBYINPUT1POWEROFFONTO SPEAKERS/MONOLOWOFF HIGHFROM AMPLIFIEROUTPUT+ – +–+ – +–INPUT2 AUTOSTANDBYINPUT1POWEROFFONTO SPEAKERS/MONOLOWOFF HIGHFROM AMPLIFIEROUTPUT+ – +–+ – +–INPUT2INPUT1TO SPEAKERS/MONOFROM AMPLIFIEROUTPUT+ – +–+ – +–INPUT2INPUT1TO SPEAKERS/MONOFROM AMPLIFIER Using two subwoofersConnect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUTterminals of the subwoofer to the main speakers.Left main speakerRight main speakerSubwooferSpeaker outputterminalsTo AC outletSubwooferTo AC outletAmplifierFor connections, keep the speaker cables as short aspossible. Do not bundle or roll up the excess part of thecables. If the connections are faulty, no sound will be heardfrom the subwoofer or the speakers, or both of them. Makesure that the + and – polarity markings of the speakercables are observed and set correctly. If these cables arereversed, the sound will be unnatural and lack bass.How to Connect:Red: positive (+)Black: negative (–)1 Loosen the knob.2 Insert the bare wire.[Remove theinsulation coating atthe extremity ofeach speaker cableby twisting thecoating off.]3 Tighten the knoband secure the wire.CautionDo not let the bare speaker wires touch each other asthis could damage the subwoofer or the amplifier, orboth of them.< U.S.A., Canada, Australia, China and General modelsonly>Banana Plug connections are also possible.1 Tighten the terminal knob.2 Simply insert the Banana Plug connector into theterminal.Connecting to the INPUT1/OUTPUT terminals of the subwoofer