Yamaha YST-SW150/80 Owner's Manual

Contents

6If your amplifier has two sets of speaker terminalsFor connections, cut the speaker wires as short as possible. Ifthe connections are faulty, no sound will be heard from thespeakers. Make sure that the polarity of the speaker wires iscorrect, that is, + and – markings are observed. If these wiresare reversed, the sound will be unnatural and will lack bass.Do not let the bare speaker wires touch each other and donot let them touch the metal parts of this unit as this coulddamage this unit, your amplifier and/or speakers.How to Connect:Red: positive (+)Black: negative (–)À Unscrew the knob.Á Insert the bare wire.[Remove approx. 5mm(1/4”) insulation fromthe speaker wires.]Â Tighten the knob andsecure the wire.* Banana Plug connections are also possible (except for U.K.and Europe models). Simply insert the Banana Plugconnector into the corresponding terminal.Connecting to this unit’s OUTPUT/INPUT terminalsTo AC outletThis unitA BRight speaker Left speakerAmplifier(Both “A” and “B” outputsmust be ON.)OUTPUTINPUT1TO SPEAKERSFROM AMPLIFIERINPUT2 PHASEON OFFAUTOPOWERNOM REVOUTPUT INPUT2 PHASETO SPEAKERSINPUT1FROM AMPLIFIERON OFFAUTOPOWERNOM REV123