Yamaha YST-SW300 Owner's Manual

Contents

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER• Leave the main speakers connected to the amplifier.1 CONNECTING TO PRE OUT OR SUBWOOFER OUT TERMINAL(S)• Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.* For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifierswith only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case,select the method of connecting to the speaker terminals.• To connect with a YAMAHA DSP amplifier, connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSPamplifier to either the left (L) or right (R) INPUT 2 terminal.To connect one unit onlyTo connect two unitsNotes• When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals onthe rear panel of this unit. If connected, they will not produce sound.• When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.8PRE OUT(SPLIT, SUBWOOFER)LOW PASS(SUBWOOFER)OUTPUTTO SPEAKERSINPUT1FROM AMPLIFIERINPUT2 H.P.F.OUTPUTPHASENOM REV 50Hz I00Hz80HzON OFFAUTOPOWERINPUT2 H.P.F.OUTPUTPHASENOM REV 50Hz I00Hz80HzON OFFAUTOPOWERPRE OUT(SPLIT, SUBWOOFER)OUTPUTTO SPEAKERSINPUT1FROM AMPLIFIERINPUT2 H.P.F.OUTPUTPHASENOM REV 50Hz I00Hz80HzON OFFAUTOPOWEROUTPUTTO SPEAKERSINPUT1FROM AMPLIFIERINPUT2 H.P.F.OUTPUTPHASENOM REV 50Hz I00Hz80HzON OFFAUTOPOWERINPUT2 H.P.F.OUTPUTPHASENOM REV 50Hz I00Hz80HzON OFFAUTOPOWERINPUT2 H.P.F.OUTPUTPHASENOM REV 50Hz I00Hz80HzON OFFAUTOPOWERThis unitPin plug cords<YAMAHA DSP amplifier>< Amplifier>Right speakerLeft speakerAmplifierTo AC outletThis unit This unitPin plugcordsRight speakerLeft speakerAmplifierTo AC outlet To AC outlet