Yamaha YZ125X 2023 Owner's Manual

HANDLEBAR4-1212.Install:• Throttle cable “1”(to the tube guide “2”)TIPApply the lithium-soap-based grease on thethrottle cable end and tube guide cable windingportion.13.Install:• Roller “1”• Collar “2”TIP• Apply the lithium-soap-based grease on theroller sliding surface and cable guide.• Install the roller so that the “UPPER” mark “a”faces upward.• Pass the throttle cable in the groove “b” in theroller.14.Install:• Throttle cable cap “1”• Throttle cable cap screw “2”15.Adjust:• Throttle grip free playRefer to “CHECKING THE THROTTLEGRIP” on page 3-5.16.Install:• Cap cover “1”17.Install:• Brake master cylinder “1”• Brake master cylinder holder “2”• Front brake master cylinder holder bolt “3”TIP• Install the holder so that the arrow mark “a” fac-es upward.• First tighten the bolt on the upper side of thebrake master cylinder holder, and then tightenthe bolt on the lower side.1231212abThrottle cable cap screw0.5 N·m (0.05 kgf·m, 0.37 lb·ft)Front brake master cylinder hold-er bolt9 N·m (0.9 kgf·m, 6.6 lb·ft)T R..T R. .