–22–SWINGARM AND DRIVE CHAIN CHAS5 Nm (0.5 mkg)95 Nm (9.5 mkg)NOTE:EAS00711INSTALLING THE SWINGARM1. Lubricate: bearings spacers dust covers pivot shaftRecommended lubricantLithium soap base grease2. Install: swingarm pivot shaft washer pivot shaft adjust bolt 1 pivot shaft nutUse the pivot shaft wrench 2 and pivot shaftwrench adapter 3 to tighten the pivot adjustbolt.Pivot shaft wrench:90890-01471Pivot shaft wrench adapter90890-014763. Install: rear shock absorber assembly rear wheelRefer to “REAR SHOCK ABSORBER AS-SEMBLY” and “REAR WHEEL”.4. Adjust: drive chain slackRefer to “ADJUSTING THE DRIVE CHAINSLACK” in chapter 3.Drive chain slack40  50 mm

important information

how to use this manual

GENERAL INFORMATION

SPECIAL TOOLS

SPECIFICATIONS

TIGHTENING TORQUE

CABLE ROUTING

CHASSIS

OVERHAULING THE ENGINE

ENGINE

INSTALLING THE ENGINE

PICKUP COIL AND PICKUP ROTOR

REAR SHOCK ABSORBER ASSEMBLY

REMOVING THE REAR SHOCK ABSORBER ASSEMBLY

SWINGARM AND DRIVE CHAIN

INSTALLING THE SWINGARM

Yamaha YZF-R6 L 2000 Service Manual

YZF-R6 2000

YZF-R6 L 2000