Yamato VF2400 class Instruction Manual

Yamato VF2400 class Instruction Manual Manual pdf 21 page image

14VF24004. LubricationBefore lubricating, ALWAYS turn the power switch OFF and check that the machine has already stopped.4.3 Changing oil4.4 Checking and replacing oil filterPeriod of changing:When using a new machine, change the lubricating oil afterrunning a machine for 200 hours (for about one month).After that, change the oil once or twice a year.Procedure for changing:(1) Remove the belt cover. (page 9)(2) Remove V-belt from the motor pulley. (page 9)(3) Remove the machine from the machine table.(4) Set a container received the oil under the screw ① .(5) After removing screw ① , oil is drained.◆ If the oil filter ② is clogged with dust, lubrication can-not be done properly.◆ Remove the oil filter cap ③ and the oil filter ② tocheck them every six months. If clogged or cracked,clean or replace the oil filter.◆ If oil is splashed from the nozzle insufficiently or in-cludes many bubbles though the oil is sufficiently kept,check or replace the oil filter.Fig. 4-4(6) Reset the screw ① .(7) Change the oil. (See “4.2 lubricating” on page 13)(8) Reset the machine on the machine table.(9) Hang V-belt on the motor pulley and reset the beltcover. (page 9)Fig. 4-5Be careful not to soil the V-belt and the machine pulleywith the oil.Carefully check and replace them without spilling oilstagnant in the oil filter ② when loosening screw ④ .O-ring②③①ATTENTIONＡＤＶＩＣＥ