PRODUCT OVERVIEWJH Series Operation Manual 3112/05VESSEL CONTROL SYSTEM (VC10)4JH common rail series engine is a fully electronic control engine, which is controlled byYanmar’s original “Vessel Control System (VC10)”.The control equipment consists of the Switch Panel, the Display, the Drive & Helm ECU,the Control Head and the Backup Panel, which are connected by the cable harness to theengine and marine gear or Shift Actuator for remote control operation.Note: The Yanmar Vessel Control System (VC10) was designed to operate the 4JHcommon rail series and drive system. There are many control functions anddiagnostic functions that are integrated together to insure safe operation. If thissystem is not utilized in specific accordance with the instructions in this manual orthe system is modified in any way, Yanmar will not be responsible for any warrantyfailures in the operation of the system or the vessel utilizing the system.Yanmar has designed the Vessel Control System (VC10) in conjunction with the4JH common rail series. The system has many functions that must beconfigured and calibrations must be made before the vessel can be operated.Please arrange to have a Yanmar trained technician inspect the vessel prior tothe vessels operation.Figure 10Figure 20SELNEUTRALTROLNTRLTo engineMarine gear orShift ActuatorTo engine182 3 4 56 7037618-01EN00No. Description1 Shift and Throttle Control Head2 Switch Panel (to start and stop the engine)3 VC10 Digital Display4 Helm ECU5 Drive ECU6 Backup Panel7 Cable Harness Set8 Adapter, Terminal
