Yazoo/Kees ZEKW48190 Operator's Manual

Also see for 968999295: Parts manual Operator's manual

Contents

Yazoo/Kees ZEKW48190 Operator's Manual Manual pdf 45 page image

English- 43MAINTENANCEChecking the Parking BrakeVisually check that no damage is found onthe lever, links, or switch belonging to theparking brake. Perform a stand-still test andcheck that there is sufficent braking action.To adjust the parking brake, contact theHusqvarna service workshop.Checking the V-beltsCheck every 100 hours of operation. Checkfor severe cracking and large nicks.NOTE: The belt will show some small cracksin normal operation.The belts are not adjusable. Replace belts ifthey begin to slip from wear.Deck beltTo replace deck beltDeck belt removal.• Park on a level surface. Apply parkbrake.• Lower the deck into the lowest cuttingposition.• Using a ratchet with a 9/16” socket onthe spring idler bolt to relieve the tensionon the belt.• Remove screws from both the left andright belt shields, and remove shields.• Remove any dirt or grass that may haveaccumulated around the cutter housingsand entire deck surface.• Carefully roll the belt over the top of thecutter housing pulleys.• Remove the belt from around the electricclutch on the engine shaft.• The belt can now be removed.8011-711The parking brake in the disengaged positionIMPORTANT INFORMATIONThe machine must be stopped beforeactivating the parking brake.WARNING!Faulty adjustment can result inreduced braking ability andcause an accident.8011-622Slackening the belt tensioner