Yealink MeetingEye 600 Quick Start Manual

Also see for MeetingEye 600: Administrator's guide Administrator's guide User guide Manual guide User guide

6TroubleshootingConnectivity TestingAfter installation and deployment, you can test the endpoint by dialing the Yealink Demo Room(117.28.251.50 or 117.28.234.45 ). If you can’t dial out successfully, please contact your ITadministrator to check the network.Configuring Static NATIf you do not use Cloud platform and deploy your endpoint in an Intranet, you have configured portmapping on the firewall or gateway, but you find that local endpoint appears black screen and youcannot hear sound when you call Yealink Demo or other endpoints. The most likely reason is that thefirewall or gateway in your environment does not support the ALG feature. In this situation, please takethe following actions so that the static NAT feature on the endpoint can solve this problem.To configure static NAT via the remote control:1. Select More->Network->Wired Network (Default Admin Password:0000)->NAT/Firewall.2. Select Automatic from the pull-down list of Type, the endpoint will obtain public IP addressautomatically.3. If the endpoint does not obtain a public IP address automatically, select Manual Settings from thepull-down list of Type, and then enter the public IP address in the Public IP Address field.4. Save the change.