Yealink One Talk CP960 Quick Start Manual

Also see for One Talk CP960: Auto provisioning guide How to configure Getting started Recovery guide Configuring guide

Contents

Yealink One Talk CP960 Quick Start Manual Manual pdf 2 page image

2Quick start guideNote: There are two types of expansion microphones available for the CP960, at extra cost: 1) A set of two wireless microphones(SKU: CPW90) and 2) a set of two wired microphones (SKU: CPE90).Assembling the phone1a. If your network does not support PoE, you must purchasethe PoE adaptor (SKU: YLPOE30) and connect the devices asshown (using Ethernet)1b. If your network does not support PoE, you must purchasethe PoE adaptor (SKU: YLPOE30) and connect the devices asshown (using Wi-Fi)Note: If your network supports PoE, you can simply connect the Ethernet cable to the CP960. The IP phone should be used with Yealinkoriginal PoE adapter (54 V/0.56 A) only (SKU: YLPOE30). The use of a third-party PoE adaptor may cause the damage to the phone. Thecable should be replaced at once if its jacketing is damaged.Packaging contentsIP phoneEthernet cable(7.5 m CAT5E UTP cable)Quick start guidePower over Ethernet (PoE)adaptor YLPOE30(must be used if your networkdoes not support PoE)PSE PowercordEthernet cable(2 m CAT5E FTP cable)2m7.5 m 7.5 mWi-FiRefer to “Wireless network connection” in the “Configuringyour phone” section for more information.