3Quick start guideConnecting to a wired or wireless networkConnecting to a wired network:Note: If you are connecting a PC to your phone, werecommend that you use the Ethernet cable provided byVerizon.Connecting to a wireless network:1. Navigate to Settings > Basic Settings > Wi-Fi2. Turn on Wi-Fi3. Select an available wireless network from the listof networks4. If the network is secure, enter its password in thePassword field5. Tap Connect to connect to the wireless networkStarting the phoneAfter the phone is connected to the network and supplied withpower, it automatically begins the initialization process. Afterstartup, the phone is ready for use. You can configure thephone via the phone user interface or the web user interface.Configuring your phoneConfiguring network settings:Navigate to Settings > Advanced Settings (default password:admin) > Network > WAN Port > IPv4.Configuring account settings:Navigate to Settings > Advanced Settings (default password:admin) > Accounts.Using basic call functionsPlacing a video/voice callUsing the handset:1. Pick up the handset2. Enter the number, and then tap SendUsing the speakerphone:1. With the handset on-hook, press2. Enter the number, and then tap SendUsing the headset:1. With the headset connected, press to activate theheadset mode2. Enter the number, and then tap SendNote: During a call, you can alternate between the headset,hands-free speakerphone and handset modes by tapping theHeadset key or the Speakerphone key or by picking up thehandset. Headset mode requires a connected headset.Answering a video/voice callUsing the handset:Pick up the handset.Using the speakerphone:Press .Using the headset:Press .Note: You can reject an incoming call by tapping Reject.PC connection(optional)PCThe desk phone will be ready to be used once the addressprovided during the ordering of the desk phone appears onthe screen. This is known as the 911 address screen, which youmust acknowledge by pressing OK before you can start usingthe phone.