Yealink SIP-T19P Quick Installation Manual

Also see for SIP-T19P: Auto provisioning guide Auto provisioning guide Provisioning guide User guide Quick installation guide

Yealink SIP-T19P Quick Installation Manual Manual pdf 1 page image

Click on->Please locate your computer in the same network segment of the IP phone (192.168.0.X) to accessthe web user interface. Contact your system administrator for more information.Check with your system administrator if any error appears during the registration process or aspecific configuration is required for your registration.The wrong network settings may result in inaccessibility of the phone and may have an impact onthe network performance. Contact your system administrator for more information.1. Press when the phone is idle to get the IP address of the phone.You can configure the network in the following ways:It shows the register status of the current account.You can select Enabled/Disabled to enable/disable the account.It is shown on the LCD to identify the account.It is shown as caller ID when placing a call.It is provided by ITSP for registration (required).It is an authenticated ID for authentication provided by ITSP (required).It is provided by ITSP for registration (required).It is provided by ITSP for registration (required).: By default, the phone attempts to contact a DHCP server in your network to obtain itsvalid network settings, e.g., IP address, subnet mask, gateway address and DNS address.: If the phone cannot contact a DHCP server for any reason, you need toconfigure IP address, subnet mask, gateway address, primary DNS address andsecondary DNS address for the phone manually.: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoEmode. Contact the ITSP for the user name and password.Press the soft key when the phone is idle, select ->()->-> to configurethe network.For more information, refer to the User Guide available online:Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.Press the soft key when the phone is idle, select ->()->to configure the account.2. Open the web browser on your computer, enter the IP address into the address bar(e.g., "http://192.168.0.10" or "192.168.0.10") and press .Register Status:Line Active:Label:Display Name:User Name:Register Name:Password:Server Host:3. Enter the user name (default: admin) and password (default: admin) in the login pageand click .Click on->->For more information on account parameters, refer to .Registered Register Failed Registeringcwww.yealink.com Applies to firmware version 71 or later.

/ 2

Related manuals for Yealink SIP-T19P