Yealink SIP-T2 Series Auto Provisioning Manual

Also see for Yealink SIP-T42G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Yealink SIP-T2 Series Auto Provisioning Manual Manual pdf 45 page image

Update Mode35The update mode is used to set the desired time for the phone to perform the autoprovisioning process. This chapter introduces the following update modes in detail: Power On Repeatedly Weekly Auto Provision Now Multi-mode Mixed SIP NOTIFY MessageThe phone performs the auto provisioning process when the phone is powered on.To activate the Power On mode via a web user interface:1. Click on Settings->Auto Provision.When there is an active call on the phone during provisioning, the auto provisioningprocess will detect the call status every 30 seconds. If the call is released within 2 hours,the auto provisioning process will be performed normally. Otherwise, the process will becompleted, due to timeout.