Yealink SIP-T2 Series Provisioning Manual

Also see for CP860 SERIES: User guide Quick start guide Administrator's guide Quick start guide User guide

Yealink SIP-T2 Series Provisioning Manual Manual pdf 41 page image

Triggering the IP Phone to Perform the Auto Provisioning352. Click Autoprovision Now.The IP phone will perform the auto provisioning process immediately.You can activate more than one method for auto provisioning. For example, you canactivate the “Power On” and “Repeatedly” modes simultaneously. The IP phone willperform the auto provisioning process when it is powered on and at a specified interval.The IP phone will perform the auto provisioning process when receiving a SIP NOTIFYmessage which contains the header “Event: check-sync”. Whether the IP phone rebootsor not depends on the value of the parameter “sip.notify_reboot_enable”. If the value isset to 1, or the value is set to 0 and the header of the SIP NOTIFY message contains anadditional string “reboot=true”, the IP phone will reboot immediately. For moreinformation on the parameter “sip.notify_reboot_enable”, refer toYealink_SIP-T2_Series_T19(P) E2_T4_Series_CP860 IP phones_Description ofConfiguration Parameters in CFG Files.xlsx. For W56P, refer toYealink IP Dect PhonesDescription of Configuration Parameters in CFG Files.xlsx.This method requires server support.