Yealink SIP-T21 E2 User Manual
Also see for SIP-T21 E2: Administrator's guideManualGetting startedRecovery guideAdministrator's guide
                                                                                                                                                                            | |
Contents
| 
Getting Started15AC PowerTo connect the AC power:1. Connect the DC plug on the power adapter to the DC5V port on the phone andconnect the other end of the power adapter into an electrical power outlet.2. Connect the included or a standard Ethernet cable between the Internet port onthe phone and the one on the wall or switch/hub device port.Power over EthernetWith the included or a regular Ethernet cable, the SIP-T21P E2 IP phone can be poweredfrom a PoE-compliant switch or hub.To connect the PoE for the SIP-T21P E2 IP phone:1. Connect the Ethernet cable between the Internet port on the phone and anavailable port on the in-line power switch/hub.Note If in-line power is provided, you don’t need to connect the phone to the power adapter.Make sure the switch/hub is PoE-compliant.The phone can also share the network with another network device such as a PC(personal computer). This is an optional connection.Important! Do not remove power from the phone while it is updating firmware andconfigurations. |
Related manuals for Yealink SIP-T21 E2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine