Dialling from the Directory Press Directory->Contact List->OK. Use the navigation key to highlight the entry you want dial. Press the Send or OK button.Making a callTo make a phone call: Pick up the handset, icon will be showed in the idle screen. Press the Speaker button, icon will be showed in the idle screen. Press the Headset button if the headset is connected to the HeadsetPort in advance. The icon will be showed in the idle screen.Note: You can also dial the number first, and then choose the method youwill use to speak to the other party.Placing a Call on Hold While on an active call, press the Hold button. To retrieve the held call, press the Resume button.To active a 2nd or 3rd call: Place the 1st call on Hold. Select another line key. Dial the number and press Send or OK. Toggle between held calls by pressing the associated line button.Answering a callAnswering an incoming call If you are not on an active call, lift the handset, press the Speaker button/Answer soft key to answer using the speakerphone or press theHeadset button to answer using the headset. If you are on an active call, press the Line key to answer the 2nd call.This will place the 1st call on Hold and you can toggle between the callsby pressing the associated Line key.Note: During the conversation, you can alternate between Headset, Handset andSpeakerphone by pressing the corresponding buttons or picking up the handset.Denying an incoming call Press Reject soft key to reject an incoming call directly and send it toyour voicemail.Created By Dale Ellwood 6 Vox_Yealink_SIP-T22P_V2