Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Yealink SIP-T22P User Manual Manual pdf 31 page image

Enterprise IP Phone Using the Basic Call Functions- 27 -3-way ConferenceYou can establish a three-party conference, during the conversation three phoneparties can communicate with each other.To establish a conference:1) Press the Conf softkey during an active call.2) The first call is placed on hold. You will hear a dial tone. Dial the number toconference in, then press the Send softkey.3) When the call is answered, the conference call will include you and the other twoparties.4) Hang up to disconnect all parties.MessageThe phone supports SMS( Short Messaging Service) and Voicemail, if you want to usethem, please make sure that your VoIP telephony system supports this functionalitiesand your accounts’ message has been enabled.VoicemailYour voice mailbox messages, which are usually stored on a media server of your localor hosted VoIP telephony system, can be accessed from your phone.New voice messages can be indicated both acoustically and visually as described below:z The idle screen will indicate the new voice messages coming:z The MESSAGE button will be lighted.To configure the Voicemail code via Phone interface:1) Press MESSAGE button，scroll to Voice Mail, press Enter softkey.2) Use the navigation keys to highlight the one you want to set, enter the code whichthe phone uses to connect to your system. Press 123 softkey to choose the properinput method.VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299