Yealink SIP-T32G User Manual
Also see for SIP-T32G: User guideAuto provisioning guideUser guideUser guideQuick reference guide
                                                                                                                      | |
Contents
| 
User Guide SIP-T32G IP Phone20You can configure the backlight status on the LCD screen as the following types: Always on: Backlight is on permanently. 1min, 2min, 5min, 10min, 30min: Backlight is turned off when the phone is inactivefor approximately 1min, 2min, 5min, 10min or 30min.To configure the backlight via phone user interface:1. Press Menu->Display->Backlight.2. Press or , or the Switch soft key to select the desired level from the ActiveLevel field.3. Press or , or the Switch soft key to select the desired level from the InactiveLevel field.4. Press or , or the Switch soft key to select the desired time from theBacklight Time field.5. Press the Save soft key to accept the change or the Back soft key to cancel.You can also configure the backlight via web user interface at the pathPhone->Preference.NoteThe default language of the phone user interface is English. The phone will detect anduse the same language as which of your internet browser for the web user interface. Ifthe language of your internet browser is not supported by the phone, the web userinterface will use English by default. You can change the language for the phone userinterface and the web user interface respectively from each other.Note Not all languages are available for selection. The available languages depend on thelanguage packs currently loaded to the IP phone. Please contact your systemadministrator for more information about the available languages of your new phone.Backlight Level means the backlight intensity. |
Related manuals for Yealink SIP-T32G
manualsdatabase
Your AI-powered manual search engine