Yealink SIP-T38G Manual
Also see for SIP-T38G: Auto provisioning guideUser guideUser guideAdmin guideAdministrator's guide
                                                                                                                            | |
Contents
| 
Gigabit Color IP Phone Customizing Your Phoneinto the advanced settings page must input administrator password at first.AccountPlease refer to the previous part “Configuration and Registration” for the basic Accountsetting information.NetworkWAN PortPlease refer to the previous part “Configuration and Registration” for the basic WANsetting information.PC PortThe following table lists the instructions of the field about the Network PC Port Setting.Field Name DescriptionAs Bridge If you select the Bridge mode, then the two Fast Ethernet ports willbe transparent.As Router If you select the Router mode, the SIP phone will work as a router.--IP address User could configure the PC port IP address.--Subnet Mask User could configure the PC port Subnet Mask.--DHCP Server If you set the DHCP server on, the device connected to the PC portwill get the IP address automatically between the start IP addressand the end IP address. But if you select the bridge mode, the DHCPserver cannot work.--Start IPAddressIndicate the range of the IP address.--End IP Indicate the range of the IP address. |
Related manuals for Yealink SIP-T38G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine