Yealink SIP-T38G User Manual

Also see for SIP-T38G: Auto provisioning guide User guide User guide Admin guide Administrator's guide

Contents

Yealink SIP-T38G User Manual Manual pdf 104 page image

User Guide for the SIP-T38G IP Phone94For more information on performing call transfer, refer to Call Transfer on page 78.4. Click Conf irm to accept the change.You can use the BLF List feature to monitor a list of users defined by your systemadministrator. For example, your system administrator enables BLF List, and creates aBLF List URI (e.g., BLFList@example.com) including a list of user1, user2 and user3 on theserver. The BLF List keys on the IP phone can present the status of user1, user2 and user3.The key LEDs illuminate either flashing or solid depending on the status of those users.For more BLF List key LED indications, refer to LED Instructions on page 5.You can use the BLF List keys in the following ways: When the monitored user is idle, press the BLF List key to dial out the phone number. When the monitored user receives an incoming call , press the BLF List key to pick upthe call directly. When there is a conversation on the monitored user, press the BLF List key to bargein and set up a conference call.To configure the BLF List settings via web user interface:1. Click on A ccount.2. Select the desired account from the A ccount field.3. Click on A dv anced.4. Enter the BLF List URI in the BLF List URI field.5. (Optional.) Enter the BLF pickup code in the BLF List P ickup Code field.