Phone Settings412. Enter the time between 0 and 14 (seconds) in the Time Out for Dial Now Rule field.3. Click Confirm.NoteArea CodeArea codes are also known as Numbering Plan Areas (NPAs). They usually indicate geographical areas in acountry. This feature is necessary only when dialing the number outside the code area. You can onlyconfigure one area code rule on your phone.To configure area code via web user interface via phone user interface:1. Click Settings->Dial Plan->Area Code.2. Enter the desired value in the Code, Minimum Length (1-15) and Maximum Length (1-15) fieldrespectively.3. Enter the desired line ID in the Account field or leave it blank.For more information on the valid values for the Account field, refer to Replace Rule.4. Click Confirm.For example, when you dial out the number “56789”, as the length of the number is between 1 andDial now rule and time out for dial now rule are configurable via web user interface only.Dial now rule is applicable for all DD phones registered to the base station.
