Yealink SIP-T46G User Manual

Also see for Yealink SIP-T46G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 129 page image

Basic Call Features1173. User on phone A walks to an available conference room where the phone isdesignated as phone C. The user dials the call park retrieve code to retrieve theparked call.The system establishes call between phone C and B.NoteYou can use call pickup to answer someone else’s incoming call on your phone. TheSIP-T46G IP phone supports directed call pickup and group call pickup. Directed callpickup is used for picking up a call that is ringing at a target phone number. Group callpickup is used for picking up a call that is ringing at any phone number in a certaingroup. The pickup group should be predefined, contact your system administrator formore information.You can pick up an incoming call by using the DPickup/Gpickup soft key. To use callpickup, you need to configure the call pickup code beforehand on a global or per-linebasis via web user interface.NoteDirected Call PickupTo enable directed call pickup and configure the directed call pickup code on a globalbasis via web user interface:1. Click on Features->Call Pickup.2. Select Enabled from the pull-down list of Directed Call Pickup.The call park code and call park retrieve code are predefined on the system server.Contact your system administrator for more information.If the parked call is not retrieved within a period of time assigned by the system, thephone performing call park will receive a call back.If there are many incoming calls at the same time, pressing the Gpickup soft key on thephone will pick up the call that rings first.