Yealink SIP-T46G User Manual

Also see for Yealink SIP-T46G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 72 page image

User Guide for the SIP-T46G IP Phone622. Do one of the following:- Enter the number you want to transfer the call to.Press or to dial out.- Press the Contacts soft key, and then select the desired group and search for thecontact.Press , or the Send soft key to dial out.3. After the party answers the call, press or the Transfer soft key to complete thetransfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can cancel the transfer before the call is connected by pressing the Cancel soft key.Network ConferenceYou can use network conference feature on the SIP-T46G IP phone to conduct a conference withmultiple participants.To set up a network conference call:1. Place a call to the first party.2. Press the Conference soft key to place a new call.The active call is placed on hold.3. Enter the number of the second party and then press , , or the Send soft key.4. When the second party answers the call, press the Conference soft key to add the secondparty to the conference.5. Press the Conference soft key to place a new call.The conference is placed on hold.6. Enter the number of the new party and then press , , or the Send soft key.7. When the new party answers the call, press the Conference soft key to add the new partyto the conference.8. Repeat steps 5 to 7 until you have added all intended parties.The procedures to set up a network conference call on specific servers may be different fromintroduced above. Contact your system administrator for more information.