Yealink SIP-W52P User Manual
Also see for SIP-W52P: User guide
                | |
screen. Example: http://192.168.1.22.Login to phone web administration interface with your username and password. Please note,nfactory default login details are username: admin and password: admin.DHCP serverFully configured and operational DHCP server.PBXware versionPBXware version 3.8In order to find out the PBXware version:Login to PBXwarenNavigate to Settings: About.nOn the top of About page is a code similar to this one PBXware Edition: Business, Release:3.8.2.0 (0129e6cc), Running: 1.8.14.1-gc-66b20dcc, PBXware Proxy v3.8.2 (31c372b),API: 2.3, where Release denotes the exact version of your PBXware.InstallationThis chapter describes how to install and connect the phone to the electrical power and datanetwork as well as how to apply factory settings.The following topics are covered:Power adapternPower over Ethernet (PoE)nFactory SettingsnPower adapterConnect the Network and PowerConnect the DC plug on the power adapter to the DC port on the phone and connect the othernend of the power adapter into an electrical power outlet.Connect the ethernet cable between the Internet port on the phone and the network port on anrouter or switch to access LAN.NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.Power over Ethernet (PoE)Connect the Network (only)Using a regular ethernet cable, your phone can be powered from a Power over Ethernet (PoE) |
Related manuals for Yealink SIP-W52P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine