Yealink T28P User Manual

Also see for SIP- T28P: User guide User guide User guide Configuration guides Quick guide

Contents

Yealink T28P User Manual Manual pdf 4 page image

Conference Call- Press the Conf button or the Conf hot key during and active call- The first call is placed on hold. There will be a dial tone. Enter the number toconference in, then press the Send hot key- When the call is answered, press the Conf button or the Conf hot key. Theconference now is established. All parties can hear and talk with each other.Voice Mail- The presence of new voice mail messages is indicated in the idle screen. Themessage LED will be on.- Press voicemail hot key or the message button, and then enter the desired passwordto retrieve the voicemailsCall TransferIf And B are on a conversation, A want to transfer the call to C, three ways can be used totransfer the call: Blind Transfer, Attended Transfer and Semi-Attended Transfer.Blind Transfer:- A and B is on a conversation, A press TRAN button to put B on hold, then A can dialthe third number C and press TRAN button to call out. Then A will turn to idle status- After C answered it, B can talk to CAnnounced Transfer:- A and B is on a conversation, A press TRAN Button to put B on hold, then A can dialthe third number C and press the # button to call out- After C answered it, A and C can have a private conversation without B hearing it,then A hung up or press the TRAN button to complete the transfer- A will be disconnected from the call, B can talk to CSemi – Announced Transfer:- A and B is on a conversation, A press TRAN button to put B on hold, then A can dialthe third number C and press the # button to call out- White C is ringing, A hang up or press the TRAN button to complete the transfer- A will be disconnected from the call when C pick up, B can talk to CCall Forward- Menu > Features>Call Forward- There are 3 options: Always Forward, Busy Forward and No Answer Forward- Select one of them and enter the number to forward to. If No Answer Forward isselected, after ring times should also be configured. Then press the save hot key tosave the changes.