Hosted Voice Quick Reference Guide Yealink T46 V 72.4 Page 6Talk Internet, email: support@talkinternet.co.uk, Tel: 01925 748443 (option 3)Press twice when the phone is idle to dial out the last dialled number.Call Mute and Un-mutePress to mute the microphone during a call.Press again to un-mute the call.Call Hold and ResumeTo place a call on hold:Press the Hold soft key during an active call.To resume the call, do one of the following:1. If there is only one call on hold, or tap the Resume soft Key.2. If there is more than one call on hold, tap the call you want to resume, and then:a. Press to switch between the calls, and then press the Resume soft key to retrieve the desiredcall.b. Press the corresponding line key to retrieve the call.If more than one call is placed on hold, a numbered prompt appears on the LCD screen, for example "2/3", indicating thatthis is the second call out of three calls.Call TransferYou can transfer a call in the following ways: Blind Transfer: Transfer a call directly to another party without consulting. Semi-Attended Transfer: Transfer a call when the target phone is ringing. Attended Transfer: Transfer a call with prior consulting.Blind Transfer Press Tran soft key during an active call. Enter the number you want to transfer to. Press the Tran soft key to complete the transfer.Semi-Attended Transfer Press Tran soft key during an active call. Enter the number you want to transfer to. Press the Tran soft key when receiving ringback.Attended Transfer Press Tran soft key during an active call. Enter the number you want to transfer to. After the party answers the call, Press the Tran soft key to complete the transfer.If you are using a handset, the transfer can be completed by hanging up the handset. You can cancel the transferbefore the call is connected by pressing the Cancel soft key.