Yealink T42G-Skype for Business Quick Start Manual

Basic Call FeaturesCall Mute and Un-mutePress to mute the microphone during a call.Press again to un-mute the call.4Call Hold and ResumeTo place a call on hold:1. Press the Hold soft key during an active call. The first line key LED slowly flashes green.Note: You can reject an incoming call by pressing More->Reject.Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes bypressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requiresa connected headset.Placing a CallUsing the handset:1. Pick up the handset.2. Enter the number, and then press the Call soft key.Using the speakerphone:1. With the handset on-hook, press .2. Enter the number, and then press the Call soft key.Answering a CallIf you are using the handset, pick up the handset.If you are using the headset, press .If you are using the speakerphone, press .Ending a CallIf you are using the handset, hang up the handset or press the EndCall soft key.If you are using the speakerphone, press or press the EndCall soft key.If you are using the headset, press the EndCall soft key.RedialPress when the phone is idle to dial out the last dialed number.2. Enter the number, and then press the Call soft key.Using the headset:1. With the headset connected, press to activate the headset mode.To resume the call, do one of the following:If there is more than one call on hold, press or to select the call you want to resume, and thenpress the Resume soft key .If there is only one call on hold, press the Resume soft key.