Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual

Also see for T48G-SKYPE FOR BUSINESS EDITION: Quick start guide Quick start guide

Contents

Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual Manual pdf 206 page image

User Guide for the T48G Skype for Business phone192The default codec is G722.3. Click Confirm to accept the change.NoteReceiving RTP StreamYou can configure the phone to receive a Real Time Transport Protocol (RTP) stream from thepre-configured multicast address(es) without involving SIP signaling. You can specify up to 10multicast addresses that the phone listens to on the network.How the phone handles incoming multicast paging calls depends on Paging Barge and PagingPriority Active parameters configured via web user interface.Paging BargeThe Paging Barge parameter defines the priority of the voice call in progress. If the priority of anincoming multicast paging call is lower than that of the active call, it will be ignoredautomatically. If Disabled is selected from the pull-down list of Paging Barge, the voice call inprogress will take precedence over all incoming multicast paging calls. Valid values in thePaging Barge field: 1 to 10: Define the priority of the active call, 1 with the highest priority, 10 with the lowest. Disabled: The voice call in progress will take precedence over all incoming paging calls.If G722 codec is used for multicast paging, the LCD screen will display the icon to indicatethat it is providing high definition voice.Default codec for multicast paging is configurable via web user interface only.