Yealink VC400 User Manual

Also see for VC400: Getting started Recovery guide Administrator's guide Administrator's guide Administrator's guide

Customizing the VC400 Video Conferencing System83To configure Far-end Camera Control via the remote control:1. Press (Menu soft key) to enter main menu.2. Press or to select the Video & Audio menu.3. Press or to scroll to Far-end Camera Control, and then press .4. Press or to scroll to Far Control of Camera, and then press to enable ordisable this feature.5. Press or to scroll to Far Set of Camera Presets, and then press to enable ordisable this feature.If you enable this feature, and the remote system completes adjusting local camera, it cansave the presets of the local camera.6. Press or to scroll to Far Move to Near Camera Presets, and then press toenable or disable this feature.If you enable this feature, the remote system can use the saved presets of the local cameraduring a call.7. Press (Save soft key) to accept the change.Far-end Camera Control is configurable via web user interface at the path Setting->Video &Audio->Far Control Near Camera/Far Set of Camera Presets/Far Move to Camera Presets.