Overview19LED Status DescriptionThe CP960 conference phone is not connected to theVC800/VC500 correctly.Mute Indicator LED on the CPE90 wired expansion microphones:LED Status DescriptionSolid red The CP960 conference phone is muted.Flashing red The CP960 conference phone is ringing.Solid green The CP960 conference phone is placing a call.The CP960 conference phone is in a call and unmuted.OffThe CPE90 is not connected to the CP960 conferencephone.The CPE90 is idle.User InterfacesThere are two ways to customize the configurations of your VC800/VC500 video conferencingsystem: Web User Interface Remote ControlNoteWeb User InterfaceYou can customize your system via the web user interface. To access the web user interface, youneed to know the IP address of your new system.To obtain the IP address, do one of the following: The IP address of the system is shown on the top right corner of the display device. Use your remote control to select (More menu), and then select Status->Network. On your CP960 conference phone, tap ->Network.The touch screen of the CP960 conference phone displays the network information.Log into the web user interface:1. Enter the IP address (for example: http://192.168.0.10 or 192.168.0.10) in the address bar ofa web browser on your PC, and then press the Enter key.Users can also use the CP960 conference phone to perform call operations. Details will beintroduced later.
