Yealink W52P User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P User Manual Manual pdf 46 page image

User Guide W52P/W52H IP DECT Phone34The radio box of the selected configuration type is marked.You can reset any individual settings and changes that you have made. Resetting yourhandset will not affect the entries of the local directory, the call log, the voice mail andthe handset‘s registration. But you need to note that other customized settings will bereset to factory default settings after resetting. We recommend that you ask your systemadministrator for advice before resetting your handset.To reset the handset:1. Press to enter the main menu.2. Select Settings->System Settings->Handset Reset.The LCD screen prompts the warning ―Reset handset to default?‖.3. Press the Yes soft key to reset the handset or the No soft key to cancel.You can trigger the auto provisioning process using the VoIP wizard. After you enter theusername and password in the wizard and confirm to perform an update, the basestation tries to connect to the RPS server. If the base station successfully connects to theRPS server, the RPS server responds the base station with the URL from where todownload the configuration files. Then the base station tries to perform the autoprovisioning.To trigger the auto provisioning using the VoIP wizard:1. Press to enter the main menu.2. Select Settings->System Settings->VoIP Wizard.3. Enter the system PIN (default: 0000) and press the Done soft key.4. Enter the desired value in the Username field and press the OK soft key.5. Enter the desired value in the Password field and press the OK soft key.The LCD screen prompts the warning ―Update now?‖.6. Press the Yes soft key to perform an update or press the No soft key to cancel.