Yealink W52P User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P User Manual Manual pdf 19 page image

Call FeaturesTo place a new call during an active call:You can have at most two calls on your handset.1. Press the Ext.Call soft key.The active call is placed on hold.2. Enter the desired number in the Call To field using the keypad.3. Press or to dial out.NoteYou can answer a call in three ways:• Using the earpiece• Using the speakerphone• Using the headsetNoteAnswering When Not in Another CallIn all cases, the active call will appear on the LCD screen showing call duration anddestination.To answer a call using the earpiece:1. Press or the Accept soft key.To answer a call using the speakerphone mode:1. Press .To answer a call using the headset:1. With a headset connected, press the Accept soft key.Answering When in Another CallIf you are during an active call, an incoming call arrives on the handset, do thefollowing:1. Press , or the Accept soft key.The incoming call is answered and the original call is placed on hold.You can ignore an incoming call by pressing the Silence soft key or reject an incomingcall by pressing the on-hook key.You can also activate Do Not Disturb mode on a per-line basis to reject all incoming callsof the specified line.You can also make an IP call by directly dialing the IP address of any IP phone. Forexample, IP: 192.168.1.15.19Answering Calls