Yealink W60P User Manual

Also see for W60P Telesystem: Auto provisioning guide How to configure User guide User guide Introduction

Contents

Yealink W60P User Manual Manual pdf 13 page image

13Yealink W60P Phone User Guide Line statusTo check the base station status via the handset:1. Press to enter the main menu.2. Select Status->Base.The LCD screen displays status information of the base station and the Network option.3. Press or to scroll through and view the status information.4. Select Network, and then press the Enter soft key.The LCD screen displays the connected network information.To check the handset status via the handset:1. Press to enter the main menu.2. Select Status->Handset.The LCD screen displays the status information of the handset.3. Press or to scroll through the status information.To check the line status via the handset:Do one of the following:- Press the Line soft key when the handset is idle to check the line status directly.- Press to enter the main menu.Select Status->Line Status.The LCD screen displays all lines registered to the currently used base station with icons for indicating theline status. For example, the icon at the bottom of a line indicates that you cannot place a call using thisline on the handset.Handset RegistrationYou can register up to 8 handsets to one W60P base station. Each handset can be registered to 4 differentbase stations.To register a new handset manually:When the handset LCD screen prompts “Press base paging 2s then press Reg.”, long press on the basestation till the registration LED flashes. There are two methods to register a new handset:Easy Registration:1. Press the Reg soft key on the handset to register quickly.Normal Registration:1. Press the OK soft key on the handset, and then select Register Handset.2. Select the desired base and then press the OK soft key. The handset begins searching thebase.3. Press the OK soft key after searching a base successfully.4. Enter the base PIN (default: 0000), and then press the Done soft key to complete registration.After the success of registration, the handset LCD screen prompts “Handset Subscribed” and “Base NO. (Thelast 4 characters of connected Base’s MAC address)”.After initializing data successfully, an icon with internal handset number and handset name appears on theLCD screen.