Yealink W80B Quick Start Manual
Also see for W80B: Getting startedRecovery guideConfiguring guideUser guideUser guide
                                    |
3ENGLISHThe handset LCD screen displays the IP address of the W80B.Easy Registration:Normal Registration:1. Press the OK soft key on the handset, and then select Register Handset.2. Select the desired base station and then press the OK soft key. The handset beginssearching the base station.1. Press the Reg soft key on the handset to register quickly.Before registering, long press on the W80B till the DECT LED indicator flashes. Youcan only register one handset to the W80B using this method.If the handset LCD screen does not prompt “Unregistered”, press the OK key to enterthe main menu, and select Settings->Registration->Register Handset to registerthe handset.Note: If the handset is registered to the base station successfully, the handset LCD screenprompts “Handset Subscribed”.Contact your system administrator for registering more handsets to the base station.The W80B must work with the handset running a specific firmwareversion. When you register an older handset to the base station, the handsetfirmware will be automatically upgraded to a matched one.Accessing the Web User Interface1. Press the OK key to enter the main menu, and then select Status->DM.2. Open a web browser on your computer, enter the IP address into the address bar(for example, "http://192.168.0.10" or "192.168.0.10"), and then press the Enter.3. Enter the user name (default: admin) and password (default: admin) in the login pageand click Login.3. Press the OK soft key after searching a base station successfully.4. Enter the base station PIN (default: 0000), and then press the Done soft key tocomplete registration.Registering the HandsetIf the handset LCD screen prompts “Unregistered!”, there are two methods toregister a new handset: |
Related manuals for Yealink W80B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine