Yedoo FIFTY 50 A User Manual

Contents

Yedoo FIFTY 50 A User Manual Manual pdf 11 page image

20 21ENWARRANTY LISTGeneral regulations: The content, extend and duration of the warranty conforms to the valid legal code inthe respective country of the purchase of the running bike.Warranty period: The buyer of the new Yedoo running bike (product) can apply the warranty during theperiod of 24 months from the purchase. The warranty commences on the day of the sale to the end userand is automatically extended when the product is taken into repair during warranty period.Warranty application: The warranty must be filled out with the retailer, where the product was purchased(see bellow). When applying the warranty, we recommend presenting the filled out sheet bellow, the rece-ipt and a complete and cleaned product. The seller will give a written confirmation to the buyer regardingthe acceptance of the product into the warranty process.Warranty conditions: The product must be assembled following the instructions of the manual. Theproducts shall only be used for the purposes, which it was designed for. The product must be stored andmaintained in the ways in accordance with the Instruction manual. The warranty does not cover damagecaused by common wear and tear is not covered by this warranty. The producer does not cover damagecaused by incorrect assembly or by use in contradiction with the Instruction manual.Product model:Serial numberof the frame:Date of purchase:Retailer:Signature and stamp:SAFETY MEASURESThe running bike in its basic equipment is designedfor riding during daylight in areas meant for sport andrecreation. For roads with car traffic or for riding inthe dark, you need to provide your running bike withsafety features (lights, reflectors, etc.) in accordancewith the regulations valid in your country. Make surethe children obey general safety regulations or trafficrules and that they use use protective accessories(helmets, knee and elbow pads, good shoes, etc.)Before each ride, always check good function of thebrakes and the overall technical condition of therunning bike. Do not exceed the maximum loadingcapacity of the running bike (as specified on thefront side). The scooter is designed for one rider only!Do not overload the scooter, it is not intended forjumping or acrobatic riding.All the speed-limiting mechanisms (brake pads ordiscs, rims, and tires etc.) can become warm whenused. For this reason, it is not recommend-able to touch them before cooling off!RIDINGINSTRUCTIONSChildren can use the running bike only under thesupervision of an adult. It is important that the childalways grips the handles with both hands at when ri-ding. While seated and balancing, the child pushes offalternating the feet as when running or walking fast.WARNING: Children can develop a considerable spe-ed, so they should be properly instructed about thepossible dangers and braking methods by the parentor the responsible adult. For braking, the child shouldsqueeze the brake lever on the handlebar or shoulduse soles of his/her shoes to slow down by putingthem to the ground.WARNING: sudden violent braking may cause injury.MAINTENANCECorrect and regular maintenance increases safety andlengthens the life span of the running bike. Regularlyinspect screw connections, quick releases, pressure intires and lubricate the moveable parts (wheels, bea-rings, handlebars bearings, cables, brake parts etc.).Make sure that no lubricant gets on the rims or brakepads. Grease reduces their effect! If this situationoccurs, it is necessary to remove the grease from allthe parts, using a solvent and/or degreaser.Inspect the tires for cuts, nicks and deformities. Repla-ce tires that show excessive wear and damage with anequivalent tire.Inspect the self-locking nuts. If they get loose freely,exchange them with new ones.Check the spokes for defects. Irregular strain or loo-seness in spokes can cause their cracking or can makethe wheel wobble.Keep the running bike clean, use soft cloth moistenedwith water. It should be stored inside, on a dry andshaded place. Do not expose the running bike to highhumidity or extreme temperatures over a long periodof time. Before the winter, prepare it against corrosionand inflate the tires to its maximal value as specifiedon the side of the tire. The producer does not coverdamage caused solely by neglected maintenance,non-adequate adaptation, or inappropriate treatmentand storage.The product complies with the corresponding EUstandards (ČSN EN 71-1, ČSN EN 71-3) and receivedquality and safely certifications from a leading Czechtesting lab - Engineering Test Institute (Strojírenskýzkušební ústav, s.p.) as well as from the internationallyrecognized TÜV SÜD Czech s.r.o.Producer: Intrea-Piko, s. r. o., Sasanková 2657/2, 106 00Prague 10, Czech Republic