Yedoo Too Too User Manual

Contents

Yedoo Too Too User Manual Manual pdf 10 page image

18 19ASSEMBLY INSTRUCTIONSENAdjustment of brake levers:incline the brake levers correctlyby loosening the screw on thesleeve (1).The right inclination: let the child siton the running bike, hold the handles andstretch out your fingers in a way that his/herarm and the fingers form a single straightline. This should be the position of thebrake lever.Seat installation: put the seattube into the frame (1) of therunning bike, adjust the desiredheight (do not exceed themaximum mark) and tighten thesleeve screw (2).Before assembly, remove the plasticcovers from the front and rear wheel axis.Handlebar installation: placethe handlebar into the main fra-me tube (1) of the running bike,adjust the desired height andtighten the screw on the stem (2).Front wheel installation: makesure the front fork of the runningbike is well positioned (the ben-ding of the fork faces forward).Place the wheel into the frontfork so that is well-centered andtighten the nuts (1, 2). (For easierinstallation you can turn therunning bike upside down).If the tire has a arrow-shaped treadpattern, the arrows should be pointing tothe front.Adjustment of brake: beforeadjusting the brakes, inflate thetires according to the values ontheir side (ideally between 1,3and 1,8 bars). Check that thebrake pads fit tightly on the rimsides. Their position can be adjus-ted via the screws (1). The padsshall not touch the tires.Bend the ending of the brakecable so that it does not obstractwhen the child is riding.Protective pad installation:place the soft protective padfrom washable nylon over thehandlebar stem.Yedoo TOO TOO ALU is equi-pped with double dropout at therear fork, which enables a biggerrange of seat height. The upperdropout is meant for lower seatposition.Check that the pads make enou-gh space (1–2 mm) after releasingthe brake levers. The distancecan be adjusted by tightening orloosening the brake cable at theanchor screw (2).In case the brake pad is touchingthe wheel when turning, symmet-rically adjust the distance of brakearms by the tightening screws (3).The lower dropout, on thecontrary, enables the seat to bepositioned higher than usual.Warning: after each positionchange, readjust the brakes.