Yongnuo YN622C II User Manual
               | |
1. Press down [MENU] button on the camera, select flashcontrol-external flash function setting. When the off-camerasetting which is consistent with the camera’s menu, the AFassist beam emitter of the receiver will blink twice to showthat the change is successfully.(p. 24)2. Enabled the wireless flash function via the camera’s menu torealize firing group control.(p.17)3. Focus and shoot picture, the flash is fired according to theparameters set of all groups. Support the function of AF assistbeam emitter of the transmitter. (p.24)Remote Control Mode11※ Suggest disabled wireless flash function when using 2stcurtain sync only.Remotely setting all the flashes through the external flashfunction setting (camera menu) of the camera, just likes the flashbeing directly installed on the camera. The settings of cameramenu is prior, settings will upgraded to the receiver afterpressing down camera confirmation button or half pressingshutter button without needing to operate the flash controlpanel, the flash’s screen will display the current setting. Thesetting varies depending on the cameras/flashes. This controlmode is the default control mode, transmitter ’s channelindicator will goes out in standby state, the camera needs to beset at P/AV/TV/M exposure mode, and it for type A cameras only. |
Related manuals for Yongnuo YN622C II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine