www.yorkfitness.com5Assembly instructionsCare & Maintenance• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the equipment in a dryplace with as little temperature variation as possible.• We recommend placing a mat beneath the equipment to protect both the equipment and your flooring.• Always place the equipment in a dry environment.• Use a warm, damp cloth to keep the product clean.• No wet cleaning of electrical components. Unplug before any care and maintenance.• The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. Thisincludes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings & connection points etc.• Ensure that you inspect the product regularly - at least once a week is recommended.• Ensure that all fixings are tight before use.• Always replace damaged / worn components with original parts from the manufacturer.PREPARE YoUR WoRK AREA - It is important you assemble the product ina clean and uncluttered space.WoRK WITh A FRIEND - We recommend you have someone assist youwith the assembly as some of the components are quite heavy.UNPACK ThE CARToN - Remove all the parts and lay them out on the floor.Part ListREF. DESCRIPTION QTY.45072-01 LOWER UPRIGHT TUBE - 04PPT 245072-02 BASE - 04PPT 245072-03 BASE OUTER CAP - 04PPT 445072-04 FOAM ROLL - 33MM OD.x 425MM L-04PPT 1YOC-024 FOAM ROLL - 28MM OD.x 130MM L 845072-05 LOWER SUPPORT BAR - 04PPT 2YOC-07 40Wx20H MM INNER CAP 445072-06 LOWER CROSS BRACE -04PPT 145072-07 STEEL PIECE -04PPT 245072-08 RIGHT ExTEND ARM -04PPT 145072-09 ARM REST -04PPT 245072-10 ExTEND ARM OUTER CAP -04PPT 245072-11 LEFT ExTEND ARM - 04PPT 145072-12 UPPER UPRIGHT BAR -04PPT 245072-13 UPPER CROSS BRACE -04PPT 145072-14 LAT BAR -04PPT 145072-15 BACKREST -04PPT 145072-16 45MM SQ. INNER CAP-04PPT 2B-W8 M8 WASHER-BLACK 10B-N8 M8 NUT-BLACK 2B-W10 M10 WASHER-BLACK 38B-N10 M10 NUT-BLACK 18B-H10-5 M10x35MM HEx HEAD BOLT-BLACK 2B-H10-11 M10x65MM HEx HEAD BOLT-BLACK 16B-H10-14 M10x80MM HEx HEAD BOLT-BLACK 2B-H8-10 M8x60MM HEx HEAD BOLT-BLACK 6B-H8-9 M8x55MM HEx HEAD BOLT-BLACK 2