York Fitness 56018 Owner's Manual

Contents

York Fitness 56018 Owner's Manual Manual pdf 5 page image

www.yorkfitness.com 5Assembly instructionsCare & Maintenance• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep theequipment in a dry place with as little temperature variation as possible.• We recommend placing a mat beneath the equipment to protect both the equipment andyour flooring.• Always place the equipment in a dry environment.• Use a warm, damp cloth to keep the product clean.• No wet cleaning of electrical components. Unplug before any care and maintenance.• The safety level of the equipment can be maintained only if it is regularly examined fordamage and wear. This includes any ropes, pulleys, nuts, bolts, moving parts, bushes,chains, wheels, bearings & connection points etc.• Ensure that you inspect the product regularly - at least once a week is recommended.• Ensure that all fixings are tight before use.• Always replace damaged / worn components with original parts from the manufacturer.PREPARE YOUR WORK AREA - It is important you assemble the product in a clean and uncluttered space.WORK WITH A FRIEND - We recommend you have someone assist you with the assembly as some of thecomponents are quite heavy.OPEN THE CARTON - Check any warnings on the carton and make sure you have it the right way up.UNPACK THE CARTON - Remove all the parts and lay them out on the floor.Make sure you have the following parts:15 x 4Carriage(M10 x 88MM)29 x 4Flat Washer(ID10.5 x OD23 x T1.5mm)27 x 1Flat Washer(ID8.5 x OD13 x T1.5mm)24 x 4Nyloc Nut(M10)21 x 1Round Allen Head Bolt(M8 x 15mm)5 x 1Stop Bracket(56 x 20 x T2mm)25 x 1Nyloc Nut(M8)43 x 4Round Plastic Bolt Cap(M10 x OD30mm)17 x 2Hex Head Bolt(M8 x 16mm)22 x 2Round Phillips HeadMachine Screw(M5 x 6mm)28 x 2Flat Washer(ID8.5 x OD28 x T2mm)30 x 2Plastic Spacer(ID12.8 x OD19 x 38mm)51 x 2Screwdriver and Allen Key52 x 1Multi Spanner (13, 17mm)