www.yorkfitness.com13Final CheckYour equipment is now assembled. Please make the followingfinal checks:• Make sure all screws / bolts are tightened.• Make sure the equipment is on a flat, level surface.Self-Generate ResistanceThis exercise equipment uses a self-generate resistance andwill recharge the battery through pedalling.• Start pedalling to turn on the console.• The computer will turn off automatically after few secondsof inactivityYBR-PXT-220BATTERIES REPLACEMENTINSTRUCTIONS:WARNING: The cross trainer use NiMH batteries. Usingother types of batteries during charging will damage theequipment. DO NOT USE ALKALINE BATTERIES IN THISPRODUCT.1. Open the battery compartment under the cross trainer.2. Remove batteries.3. Insert 5 AA batteries ensuring you match the polaritymarkings (+ and -) on the batteries with the indicators inthe battery compartment. Push flat end ( - ) against springand when clear push other end into holder.4. Close the battery compartment.Tips & Warnings• Always change all the batteries at the same time.• Always use the same type of batteries.• Never recharge Alkaline AA batteries.• Do not try to heat, ignite, disassemble or throw AAbatteries into a fire.• Do not leave old batteries in the console, and removebatteries from the console if you won’t be using it for along time.Protect the environment by not disposingof this product or batteries with householdwaste. Check your local authority for recyclingadvice and facilities.* PICTURE MAY VARY FROM ACTUAL MODEL.