York MCC Technical Manual
Also see for MOC09: Owner's guide
            | |
DE - COMMISSIONING DISMANTLING & DISPOSALThis product contains refrigerant under pressure, rotating parts, and electrical connections which may be a danger and cause injury!All work must only be carried out by competent persons using suitable protective clothing and safety precautions.Read the Manual Risk of electric shock Unit is remotely controlled and may start without warning1. Isolate all sources of electrical supply to the unit including any control system supplies switched by the unit. Ensure that all points of electrical and gasisolation are secured in the OFF position. The supply cables and gas pipework may then be disconnected and removed. For points of connection referto unit installation instructions.2. Remove all refrigerant from each system of the unit into a suitable container using a refrigerant reclaim or recovery unit. This refrigerant may then bere-used, if appropriate, or returned to the manufacturer for disposal. Under No circumstances should refrigerant be vented to atmosphere. Whereappropriate, drain the refrigerant oil from each system into a suitable container and dispose of according to local laws and regulations governingdisposal of oily wastes.3. Packaged unit can generally be removed in one piece after disconnection as above. Any fixing down bolts should be removed and then unit liftedfrom position using the points provided and equipment of adequate lifting capacity. Reference MUST be made to the unit installation instructions forunit weight and correct methods of lifting. Note that any residual or spilt refrigerant oil should be mopped up and disposed of as described above.4. After removal from position the unit parts may be disposed of according to local laws and regulations. |
Related manuals for York MOC09
manualsdatabase
Your AI-powered manual search engine